Apollo 11 and 17 Landing Sites

Image

What is the smallest detail of the lunar surface can I get with a 80mm telescope (600mm focal length) and Canon 10.1Mpixel camera? Matching some of the smaller craters in a Moon atlas gives me roughly 6-8km/pixel. But with image processing anything below 10km doesn’t really show or will blur in the noise.

I tagged a few geological features and dimensioned two craters for reference. At the same time identified the approximate Apollo 11 and 17 landing sites. The Apollo Lunar module is only 9.4m wide, hence it is impossible for any Earth bound telescope can possibly pick them up (even Hubble). However the Lunar Reconnaissance Orbiter (LRO) did manage to pull it off by lowering its orbit as low as 50km above the lunar surface.

Apollo 11 and 17 landing sites and other features. Moon (October 6th, 2016) – Benoit Guertin

My original photo of the Moon.

Moon – October 6th, 2016

Image

Quick picture of the Moon with the telescope balanced on a railing. Didn’t trouble getting the mount out.

Moon – October 6th, 2016 – Benoît Guertin

October 5th 2016 – Mars, Saturn and the Moon

Image

Didn’t have the luxury to scout a better setting to frame the picture. In the street was actually better than my backyard with all the electric and utility poles/wires. But nevertheless took a few minutes to frame the scene down the street while standing under a street light. Click on the image to expand.

October 5th, 2016 – Mars, Saturn and the Crescent Moon

Almost in the same horizontal plane, you have Mars on the left and Saturn close to the Moon.

As it wasn’t fully dark yet, and I was on a tripod the exposure was rather short: 1/2sec at ISO 400. Hence no rich star field this time around. But you do see some of the bright stars such as Antares below Saturn. Below is an overlay with a star chart.

Overlay with star chart – October 5th, 2016

If you missed it, there is still tomorrow… the Moon will have moved to a position above Saturn.

October 5th 2016 Photo Opportunity

Posted on October 5, 2016 by Benoit Guertin

Great photographic opportunity tonight and tomorrow with a crescent Moon near Saturn in the early evening sky. Mars is also visible a bit further east and if you have a clear view of the horizon you may catch a glimpse of Venus before it sets.

Octobre 5th 2016 Southwest Evening Sky (SkyNews.ca)

Ref: SkyNews.ca

Layers and Blurring

Image

We spend lots of money on expensive optics and hours trying to get the focus spot-on or the mount alignment/guiding perfect for smooth tracking to avoid blurry and stretched stars. So why would you want to blur your final image?

Consider the images below. The one of the left is softer and more pleasing to the eyes, yet the stars remained sharp.

Side-by-side compare of blurred and the original image

One way to obtain this effect is by creating copies of the image, applying varying blur to each and then adding them from heaviest to the least blur using the Lighten only layer mode.

Take your original image and duplicate as required (in my example I blurred two layers, hence need a total of three identical layers).

Original image (centered on Constellation Vulpecula)

Apply heavy blur to the bottom layer. At the same time, reduce the color saturation and adjust the levels to get nice blacks. You want the blacks to be nice and dark such that the general shape of the cloud-like structures appear due to the bright and dark zones. In this example, the blur was applied to a level of 80 pixels.

Heavy blur to the bottom layer, and reduced color saturation

Repeat the same for the middle layer, but with less blur (level of 20 pixels). If you want the colors of the stars to pop out, increase the color saturation. It will create an effect of nebulosity around bright stars. Once again, adjust the levels as required.

Medium blur to create nebulosity effect

Finally, the top layer don’t apply any blur, adjust the curves to reduce the faint portion of the image as you don’t need to keep this portion of the image. You only want to keep the nice bright stars. The dim structures are kept in the lower two blurred layers.

Adjust the % between the layers to get the desired effects The pixel intensity from bottom (most blurred) to the top will be kept only if the result is brighter than the previous layer. The sharp and bright stars are from the top layer, while the overall dim structures are from the blurred lower layers.

Final result after blending the 3 layers

Turn the various layers on/off to see what is the contribution of each. It’s a lot of trial and error depending what you accentuate versus what you want to fade into the background. Play with the level of blur, the curves and the % layer blending until you get the effect you desire.

For more information on the original image, see my post on Vulpecula.

Wide Field Around Vulpecula

Image

Continuing my wide field photography of the Milky Way I centered on the constellation Vulpecula (little fox) located in the middle of the Summer Triangle.

In the same frame, three Messier objects are identified: globular cluster M56 and M71; planetary nebula M27. Interesting fact is star HD189733 (second bright star above M27 in the framed portion) is the nearest extra-solar planet (63 light years) where the presence of water was detected. But at 700degC, chances for life are pretty slim.

Left to Right: Globular Cluster M71 in Sagitta; Planetary Nebular M27 in Vulpecula; Globular Cluster M56 in Cygnus

The three constellations from left to right are: Sagitta, Vulpecula and Cygnus (also know as Northern Cross).

As a footnote, this was captured with nearly a full moon in a heavily light polluted suburb. At 30 seconds of exposure time, the luminosity peak was around 75%.

Canon XTi (450D)
50mm F3.2 (ISO 800)
46 x 30sec (23 minutes)

Rosetta spacecraft’s last few days

Posted on September 21, 2016 by Benoit Guertin

After over 12 years Rosetta will be decommissioned by sending it down to impact with comet 67P/C-G. This fate was decided as the comet is moving away from the sun, beyond the orbit of Jupiter and the solar panels will not generate enough power to keep the spacecraft operational. Even “hibernation” is not a possibility as heaters are still required to keep the critical systems idling. Hence mission control will send commands in the next few days such that on September 29th a series of maneuvers will send it on a impact trajectory with the comet. As the comet’s gravity is rather weak (1/10,000 of Earth’s) it will most likely not be a fatal impact. However the Rosetta will be instructed to shutdown upon contact with the surface in order not to “pollute” the deep space communication network with spurious and uncommanded signals. This is expected to happen on September 30th 10:40 GMT.

So where is comet 67P/C-G? Travelling towards the orbit of Jupiter, in constellation Virgo, opposite to the sun from Earth’s perspective. Normally an event like this would be timed to be observable at night from Earth such that telescopes can gather scientific data. But at apparent magnitude 20 (to compare, Pluto has a mean apparent magnitude of 15) it will be very difficult to observe. And the impact is not expected to generate a large plume of dust. Therefore it will be up to Rosetta to record and beam back to Earth as much data during the descent before shutting down for good.

Rosetta and comet 67P/C-G position on September 30th

Reference: ESA

Dark Nebula – Barnard 142 and 143

Image

In my previous post I captured a hint dark nebula Barnard 142 and 143. But as the lens drifted out of focus, I could only use a few frames (14 out of 60). At the next clear sky I aimed Altair in the constellation Aquila with the goal to capture a good 60 frames in-focus to once again capture Barnard 142 and 143.

Dark Nebula Barnard 142 and 143 near Altair (Aquila)

The entire image scaled 40% (the above is a crop) is available here.

Canon XTi
50mm F3.2 ISO800
59 x 30sec (29.5 minutes of integration)

Wide Angle on Constellation Sagitta (Messier 71 and Messier 27)

Image

The fall is a great time for wide-angle photography of the night sky. The Milky Way passes overhead which provides a chance to capture some dark nebula. Unfortunately after I had everything setup the 50mm Canon lens drifted out of focus; I only got about 2-3 frames with decent focus. By frame 14 of 60, it was too out of focus to even register (align) with software. When set to manual focus that lens is way too loose.

But I managed to capture a hint of my first dark nebula at the bottom half of the image. Those immense molecular clouds that block out the background stars. In the following millions of years, these clouds will collapse to create start nurseries and new solar systems.

Messier 71 (Globular Cluster) and Messier 27 (Planetary Nebula) near constellation Sagitta

Globular cluster Messier 71 and planetary nebula Messier 27 are identified in my image around the constellation Sagitta. I’m surprised at how “bright” and blue that nebula turned out.

Photo Details:
Canon XTi (ISO 800)
Canon 50mm F3.2
14 x 30 sec

2016 Harvest Moon

Image

A Full Moon near the autumn equinox? Well that’s a Harvest Moon. While the Moon over the horizon can look rather large, there’s some disagreement whether the 2016 Harvest Moon should also be a Super Moon. I’ll let them sort it out while I snap a few pictures…